![]() Create this adorable Bunny Plant Poke. |
What You'll Need:
18-inch wood dowel, 5mm
White jumbo loopy chenille stem
Ruler
Poms: 1 white, 2 inches; 2 white,
1/2 inch each; 1 pink, 1/4 inch; 1 white,
1 inch
Low-temperature glue gun and glue sticks
Pencil
Tracing paper
Scissors
Felt: 3-1/2x5 inches white, 2x2 inches pink
2 wiggle eyes, 10mm each
Tweezers
Black dimensional paint
Small wood teardrop cutout
Paintbrush
Orange acrylic paint
9 inches green yarn
Download the Bunny Poke Plant Patterns in PDF format, and print them out for use as described below.
Spiral-wrap the white chenille stem around 3 inches of one end of the dowel, spot-gluing every inch.
For the bunny's head, glue the 2-inch white pom on top of the chenille stem. To make the cheeks, glue two 1/2-inch white poms side by side toward the bottom of
the head.
Trace the teeth from the pattern, and cut them from the white felt; glue just under the cheeks. For the nose, glue the pink pom to the top middle of the cheeks. Use tweezers to glue 2 wiggle eyes above the cheeks.
![]() Wrap and glue the chenille stem. |
More Options: