How to Fix Cracked Plaster in 4 Steps

Cracked plaster and peeling paint from wall
Plaster is both durable and good-looking, but it inevitably develops cracks. Flavio Coelho / Getty Images

Older homes often have lath-and-plaster walls. Plaster is both a durable and good-looking surface, ­but there is one drawback: Plaster inevitably develops cracks.

Latex paint will hide hairline cracks in plaster, at least temporarily. The coverup, though, may last only a few hours or a few months. Small plaster cracks have an annoying way of showing up again and again. It may be smarter to enlarge them and fix them properly once and for all.

Advertisement

Making a small flaw bigger may sound like reverse logic, but it's easier to fix big cracks in plaster than small ones. Use plaster of paris, which doesn't shrink as it dries, or purchase premixed plaster repair compound.

What You'll Need

Here are the tools you'll want to have when repairing cracked plaster:

  • Utility knife
  • Vacuum cleaner
  • Plaster of paris or premixed plaster repair compound
  • Paintbrushes
  • Scraper or trowel
  • Wood block
  • Medium- or fine-grade sandpaper
  • Primer and paint

Advertisement

1. Prepare the Crack

Cut away loose plaster with utility knife. Turn knife to make opening wider and more clean-lined. Remove debris while preserving structural integrity of surface around it. Clean away loose plaster and dust with vacuum cleaner.

Advertisement

2. Mix and Apply Plaster

Mix thick paste of plaster of paris and water, and wet crack thoroughly with paintbrush dipped in water. Pack plaster of paris (or repair compound) into wet crack to its full depth, and smooth surface with scraper or trowel. Let filled crack dry at least 24 hours.

Advertisement

3. Sand and Let Dry

Lightly sand patch when plaster is dry with medium-or fine-grade sandpaper wrapped around wood block. If crack was wide, replaster it at least once more to make surface smooth, rewetting plastered area each time. Let area dry for at least 24 hours after final plastering.

Advertisement

4. Sand, Prime and Paint

Lightly sand patch again, and prime it with thinned coat of paint or primer. When primer is dry, paint entire wall.

Advertisement

Advertisement

Loading...