Like HowStuffWorks on Facebook!

How Xeriscaping Works


Principles of Xeriscaping: Soil, Water, Mulch, Maintenance
With less water, the roots of a plant will become weaker and lose their hold of the soil.
With less water, the roots of a plant will become weaker and lose their hold of the soil.
2008 HowStuffWorks

Soil improvement

Although plant selection is important, many people aren't aware of how necessary proper soil preparation is to a Xeriscaping project. The right kind of soil will keep plants cool, refrain from evaporating water and retain any excess moisture.

There are three basic types of soil -- sand, silt and clay. Most soil is a combination of the three, but silt works the best for a Xeriscaped garden. Sand allows too much drainage to slip through, while clay retains moisture for too long.

Watering

It's important to know how much water is needed for plants. Some plants can rely on the limited rainwater a region might receive during a drought, but many still need water maintenance, even if it's just a little. Even during the initial stages of conversion, plants may need just as much water as a regular landscape while they establish a root system.

Carefully monitoring your plants can help you determine how much water they’ll need. When plants get thirsty, their roots will shrink up to look for moisture. Although they're trying to feed themselves when this happens, they're also making their root foundation in the ground much weaker. You can usually tell a plant needs more water when it appears to be holding on a little too loosely in the ground.

You can provide plants with efficient irrigation with either a hose-end sprinkler or automatic sprinkler systems. It's important to keep water as low to the ground as possible to avoid spreading it toward unnecessary locations and causing evaporation. There are also drip, micro-spray and bubbler systems that work best for flower beds and shrubs.

Use of mulch

Important for keeping roots cool and minimizing water evaporation, mulch is available in two types -- organic and inorganic. Organic mulch is wood-based, including bark mulch, cedar mulch and pine peelings. Although this type needs to be replaced regularly to keep away rot, wood-based mulch keeps landscapes cool and adds good, complementary color. Inorganic mulch, on the other hand, is stone-based, such as cobblestone or lava rock. Stones don't need to be replaced, but they work best in the shade, since otherwise they'll soak up any heat from the sun and evaporate much-needed moisture.

Pioneer Park in St. Petersburg, Fla. If properly maintained, a Xeriscaped landscape can look as nice as a regular lawn.
Pioneer Park in St. Petersburg, Fla. If properly maintained, a Xeriscaped landscape can look as nice as a regular lawn.
Peter Essick/Aurora/Getty Images

Maintenance

After everything is planned, prepared and planted, keeping up the landscape is the final step. Fortunately, Xeriscaping makes this easier -- it takes less water to keep plants alive, and any foliage is usually slow-growing. Typical plant grooming is recommended. Clear any dead branches or leaves to promote growth, and make sure the roots are strong.

For lots more information on gardening, plants and water, see the next page.


More to Explore