Washing the exterior of your home before a paint job may reveal nails that have popped out of the siding or rusting nail heads that have left streaks of rust on exterior walls. If so, use sandpaper or steel wool to clean the nail heads. On clapboard siding, use a nail set to recess the nail head about ⅛ inch below the surface of the wood. Dab on a coat of rust-inhibiting primer (unless the nail is aluminum or nonrusting galvanized steel), and let it dry. Then fill the nail hole with spackle or putty. When the filler is dry, give it a coat of primer. For flathead nails, which cannot be recessed, sand the heads until they're shiny, and coat with primer.
Not what you're looking for? Try these helpful articles:
A nail set can be used to push a popped nail head below the surface.
- House Painting: Ready to tackle a house painting project? Gather helpful tips on both interior and exterior painting in this home improvement article.
- House Painting Tools: Before taking on any painting project, make sure you have the tools you'll need to do the job well. This article will help.
- Exterior Painting Preparation: Plenty of prep work goes into getting the exterior of a home ready to paint. Find helpful tips only at HowStuffWorks.