Can you use a heat gun to cure powder coating?

By: HowStuffWorks.com Contributors  | 
An image of a man spraying powder coating.
Powder coating is used as an alternative to painting. It is a type of coating that is applied as a free-flowing, dry powder. Monty Rakusen / Getty Images/Image Source

Powder coating is an alternative to painting in which powdered, pigmented particles are given an electrostatic charge and sprayed over a grounded item using a special gun; the powder is then cured using heat. The two main types of powder used in powder coating are thermoplastic powders and thermosetting powders. Thermoplastic powders can be melted when reheated, whereas thermosetting powders can't be melted again once they're cured. In traditional wet painting, the coating "cures" as the liquid part of the paint evaporates. Since there's no liquid involved in a powder coating, it's considered dry paint. For these reasons, powder coating is also referred to as electrostatic powder painting and non-solvent painting.

The curing process for powder coating is normally done in a special oven; the coating has to be exposed to a temperature range of 350 to 400 degrees Fahrenheit (160 to 210 degrees Celsius) for 20 minutes. When melting the more common thermosetting powder, it bonds chemically to form a hard, permanent layer of paint. Thermoplastic powders harden, but if they are heated again, they become malleable and only harden again when they cool.

Advertisement

To cure powder coating, both the powder and the substrate have to reach the desired temperature and stay there for the allotted time without any temperature fluctuations. For this reason, the best way to cure powder coating is with a curing oven. However, a kitchen oven works just as well, as long as you don't plan to use it for cooking food ever again. For small items, a toaster oven is just as good. While some people may choose to use a heat gun to melt the powder so that it stays in place while the item is transferred to an oven, a heat gun can't produce the necessary stable, all-encompassing temperature required to cure powder coating.

Powder Coating FAQ

What is the powder coating process?
Powdered coating is a paint alternative where a powdered pigmented material is sprayed over a surface with the help of a special electronic spray gun. Then, it’s cured to transform into an even coating using heat.
Is powder coating better than liquid paint?
Powder coating is better than liquid paint because it offers a durable and even finish. It can withstand extreme weather and is less likely to fade and scratch. The only drawback is that powder coating is more expensive than traditional paint.
What type of powder is used in powder coating?
Powder coating uses two types of powder: thermoplastic and thermosetting. The difference between the two is that thermoplastic can be re-heated and melted even after application, while thermosetting cannot be liquefied once it has cured.
What is the curing process for powder coating?
The curing process involves heating the powder coating in a special oven that reaches temperatures of 350 to 400 degrees Fahrenheit for 20 minutes. This allows the synthetic polymer chains to bond, resulting in permanent coating.
Can you use a heat gun to cure powder coating?
No, you can’t. Powder coating requires a continuous, high temperature for polymer cross-linking, which a heat gun can’t do.

Advertisement

Loading...