Stainless Steel Scratch Removers
Stainless steel can be wiped down with plain water, a vinegar-and-water blend or special cleansers that help keep the metal's luster (which beautifully highlights all those fingerprints!). But what happens when your appliance's perfect sheen gets an unsightly scratch?
Stainless steel comes in various grades and finishes, and home-grade stainless steel is usually the norm for all appliances. So before you attempt to buff out a scratch in your fridge or sink, be sure to check with the appliance's manufacturer to verify which type of stainless steel you're working with.
Here are some stainless steel scratch removal techniques for you to try:
- For fine scratches, cleaners such as Comet and Revere Stainless Steel and Copper Cleaner are non-abrasive cleansers that will gently buff stainless steel. They come in a dry powder that needs to be combined with water or as cream-based cleaners that go on the metal a bit smoother. Appliance manufacturers often make their own cleaners that are easy to find at home improvement stores.
- Sanding with wet sandpaper is recommended for deeper scratches. Sandpaper comes in various grits, so check first with your appliance manufacturer about which kind of sandpaper will work best for your stainless steel.
- If you have a lot of scratches, there are a few DIY scratch removal kits, such as Scratch-B-Gone or the Siege 63001 Stainless Steel Sink and Cookware Scratch Remover pack, that will take you step by step through the scratch removal process. These kits feature products similar to the two described above in one kit and will cost you a little more out of pocket.
One piece of advice is universal -- always rub or buff the scratch with the grain of the metal. If you go against the grain of the steel, you'll only make the scratch worse!
When in doubt, call a professional. Maybe you've tried everything, or maybe your scratch is more like a gash. There are professional stainless steel restorers who will come to your home to give you an estimate for repairs. This route will cost the most, but if you've tried everything or if it's too big a job, leave it to the experts.