Advertisement

How to Install a Ceiling Fan in 8 Steps

Ceiling fans are a popular home feature. Luckily, replacing a light fixture with a new ceiling fan is an easy process. With just a little more work, you can add a new lighting fixture to the bottom of the fan unit. Only basic tools and skills are needed when installing ceiling fans.

Head over to the next page for the first step.

Advertisement

Advertisement

To deenergize circuit, remove appropriate fuse or trip correct circuit breaker. Alternately, you can throw main switch to shut off all electricity in your home.

Advertisement

Advertisement

Remove original light fixture from ceiling. Most fixtures are bolted or screwed into ceiling and can be disconnected once cover is removed.

Advertisement

Advertisement

Lower fixture, and disconnect wires. Mark each with piece of masking tape for identification later.

Advertisement

Advertisement

Follow manufacturer's instructions when installing a ceiling fan, but usually you will connect the black wires together, the white wires together, and the bare or green wire to the junction box.
Follow manufacturer's instructions when installing a ceiling fan, but usually you will connect the black wires together, the white wires together, and the bare or green wire to the junction box.

 

Review manufacturer's instructions on color coding of wiring and recommended ceiling fan installation procedures. In most homes, there will be two wires in circuit and three in fixture. Connect black wires together and white wires together, then connect remaining ground (bare or green) wire to metal junction box or other location suggested by manufacturer. Use wirenuts to make connections and, once connected, check them for tightness.

Advertisement

Advertisement

 

Check over wiring, reviewing manufacturer's instructions. Then carefully push all wires into junction box, a metal or plastic container for electrical connections.

Advertisement

Advertisement

Attach fixture to junction box or hangers as directed by manufacturer.

Advertisement

Advertisement

If you're installing a light below fan, make sure two parts are of the same brand and designed to work together (this will make process much easier). Remove bottom cover from fan unit, and pull out ends of any loose wires. Follow manufacturer's instructions for connection. Typically that means connect black to black, white to white, and ground to ground.

Advertisement

Advertisement

Reenergize circuit and test system.

Many home electricity repairs are within reach for the do-it-yourselfer. Just be sure you take appropriate safety precautions, and don't hesitate to call in a professional when necessary.

Advertisement

Advertisement

UP NEXT

Owning an Old House: Charming Love Affair or Expensive Money Pit?

Owning an Old House: Charming Love Affair or Expensive Money Pit?

Old houses have an undeniable charm, but there are inherent issues that can turn owning one into a nightmare. Knowing what to watch for is key.


Related HowStuffWorks Articles

Advertisement


Advertisement

Advertisement

Advertisement

Advertisement

Advertisement

Advertisement